BEFORE SERVICE BLOCK
- [ ] Turn on Cameras
- [ ] Remove Lens Caps
- [ ] Turn on Multiview TVs and QC monitor
- [ ] Unlock Switcher
- [ ] Press Setup Button on router panel
- Home → Salvo → FOH/Broadcast
- [ ] Swap confidence to CG-A Conf on router panel
- Press: A CONF / CONF and A CONF / DSM buttons
- [ ] Test confidence from CG-C
- Press: C CONF / CONF and C CONF / DSM buttons
- [ ] Turn on cameras from RCPs
- Make sure PANEL ACTIVE button at the bottom right is on
- [ ] Check Camera Comm
- [ ] Test all inputs that will be used in service
- Cams, CGs, PVP, Still Stores, Playback Decks
- [ ] Test Keys 1-4 on ME1 & ME2
- [ ] Test FLEX Keys 1-4
- [ ] Check AUX Outs
- Aux 1&2 (IMAG) = ME2 PGM
- Aux 3&4 (Center) = PVP 3&4
- Aux 5 (Stream/LAO1-1) = ME2 Out2
- Aux 6 (LAO1-2) = Cam 5
- [ ] Test macros that will be used in the service
- [ ] Run rehearsal and practice all transitions with camera ops
SERVICES
- [ ] Confirm with Producer or Propresenter op that all record decks are rolling 15 minutes prior to service
- [ ] Take PreRoll from CG-B before doors are open to the auditorium
- [ ] Go air on CG-A over PreRoll for 15 minute countdown