BEFORE SERVICES
- [ ] Communicate with Video Director on camera assignment & overview of shot expectations
- Camera 1 - Tight Shot
- Camera 2 - Wide / Creative, TV shot during message (Olson)
- Camera 3 - Wide / Creative
- [ ] Unlock camera center pin lock
- Pin lock is a silver tab located on the right side of your camera that will be pressed in causing the silver lock button to become flush with the rest of the camera.
- [ ] Unlock pan/tilt breaks
- Pan/tilt breaks are located on the bottom right side of the camera to lock you will pull them forward to unlock you will push them back.
- [ ] Check focus & adjust focus
- To check your focus you will push all the way into a vocalist on the front line.
- To adjust focus towards the wall you will twist your focus wheel towards the wall.
- To adjust focus away from the wall you will twist your focus wheel away from the wall.
- [ ] Check Comms
- Make sure you are able to hear people talking to you on com and adjust your volume as necessary.
- Make sure that others can hear you as well.
- [ ] Practice shots during rehearsal with directions from Video Director
- If you are unaware of any shot expectations connect with your video director.
AFTER SERVICES
- [ ] Lock camera (center pin lock)
- Press the silver lock button (if it does not go in tilt camera up while pressing until it goes in)
- [ ] Lock pan/tilt breaks
- After locking center pin turn on your pan and tilt lock on the bottom right of your camera.
- [ ] Clean up area
- [ ] Leave comments as needed