BEFORE REHEARSAL
- [ ] Audio Console should be left on (please inform campus lead if it is off)
- Power Switch is on back if needed
- Promptly test all vocal and handheld mics, QLAB, Mains/Subs, and Q-sys system speakers if the console was turned off at arrival to campus
- Login to the console (FYI: Touchscreen is touchy and will cause you to mis-type password; just keep trying until it works)
- Profile: Admin
- Password: itownworship
- [ ] FOH Mac Mini should be left on but might be shut down
- Power on with button on the back if needed
- Login
- Profile: ITOWN Production
- Password: itownworship!
- The following program should be open on the left monitor
- Shure Wireless Workbench
- Click on Monitor Tab near middle and top of window
- Click on arrow/triangle in the silver bar on the right side of the screen to open Device Chooser
- Under the Channels drop down menu(click on black arrow/triangle next to Channels to drop down/lift up menu) click each box under the strip column (each box should turn into a blue checkmark)
- Click on arrow/triangle in the silver bar on the right side of the screen to close Device Chooser
- The following program should be open on the right monitor
- Qlab
- You will find the correct folder (AC_MONTH_YEAR_VERSION) on the desktop
- Open folder and you will find the Qlab file (AC_MONTH_YEAR_VERSION) and a folder labled “audio” that is full of songs
- Open Qlab file
- After opening
- [ ] Load Scene for service (Allen and Heath calls them shows; ITOWN Production calls them scenes)
- Push the Setup button (To the right of the touch screen)
- Press the Memory tab at the top of the touch screen
- There is two sub tabs named Show Manager and Library Manager; Select Show Manager if not selected already (it usually will be selected already)
- There are two columns under Show Manager (GLD Shows and USB-Unplugged/Plugged In) Under GLD shows, select AC CURRENT SHOW
- [ ] Check levels on Output Layer and adjust as needed (Bank 3/ Layer D)
- Mains Matrix: -10dB
- Sub Matrix: -10dB
- Prodo Aux: 0dB (Unity)
- Overall level for Production Suite; mostly a post-fader aux)
- PGM Matrix: 0dB (Unity)
- Overall level for feed to the rest of the building
- LR Main: 0dB (Unity)
- Your Mix button should always be selected here unless adjusting an in-ear mix; this what your mi
- [ ] PA will already be on
- [ ] Open Qlab
- Appropriate file is located Finder>QLAB>01 - Weekend>QLAB_Campus_Month_Year_Version
- [ ] Mix Rehearsal
- Helping band with in ear mixes as needed
AFTER REHEARSAL
- [ ] Prepare and check Pastor/Speaker Mics
- [ ] Test Videos with Production suite
- Primary: DEMB-B
- Secondary: DEMB-A
- Faders at Unity
- [ ] Mute Resi inputs (DCAs: OF Band, OF PGM, OF Vox, OF Aux, and OF PD)
- [ ] Select Huddle Preset in Q-sys control app on iPad
- [ ] Fade down Main Matrix and Sub Matrix
- [ ] Prep HH 1 for huddle
- [ ] Run huddle with iPad using GLD Remote
- [ ] Set Main Matrix and Sub Matrix to -7
- [ ] Select Service Preset in Q-sys control app on iPad
SERVICE
- [ ] Mute Resi inputs (DCAs: OF Band, OF PGM, OF Vox, OF Aux, and OF PD)